Weldi-MIG 422 SW

Weldi-MIG 422 SW
Three-phase, shielding gas, semi-automatic, water-cooled separated MIG/MAG welding equipment with consumable electrodes

The Weldi-MIG 422 SW equipment is a water-cooled welding apparatus of high performance, operating with a three-phase mains, equipped with a separate wire-feeder. It can be applied in a wide range in case of welding processes of thin and medium thick materials. It can be excellently used either in the construction of steel structures, or in the serial production. Its intelligent electronic device provides a possibility for operating modes of welding with 2/4 strokes, interval and arc spot welding. It can be used excellently for sheet works either in serial production under easy or difficult industrial circumstances. The equipment is suitable for welding with either CO2 or mixed gas.

The welding machine consists of two separate units, due to which you do not have to keep the whole equipment in the working area; it is sufficient if only the wire-feeder equipment is taken with us. So the welding machine becomes usable in a narrow place as well. The Weldi-MIG 422 SW is an industrial welding machine due to the performance and reliability of which it can be a perfect choice for Your company.

Technical data
Mains voltage	3×400 V / 50 Hz
Rated input power at duty cycle 60%	15 kVA
Mains fuse (slow blow)	3×25 A
Max. input current	3×30 A
No-load voltage	17 - 47 V
Welding current range	40 - 420 A
Duty cycle (Tc=10 min)	45% - 420 A 60% - 360 A 100% - 280 A
Voltage steps	30
Welding functions	2 stroke 4 stroke Spot Interval
Polarity exchange	built-in
Digital current-voltage meter	built-in
Gas preheater supply 42 V	bulit-in
Remote control socket	(option)
Overload protection	thermal protector
Insulation class	F
Protection	IP21
Dimensions W × H × L	600×820×1000
Weight	246 kg

If you would like to get more information concerning our machine, maybe to try it out, please turn to us trustfully

< Prev		Next >